Volume 7 Information Journal 2024
Fully Refurbished Frac Unit with Centrifugal Boost Pump
Greg’s Equipment Update
The New Year is upon us, all the best to everyone in 2024.
Currently in production we have New Fracturing Equipment and New Next Generation Cement Equipment. Some of this equipment is staying in the USA with many projects destined for International Operations. We will feature those projects and comment further regarding solutions implemented as those projects are completed.
Full refurbishments are still very active with approximately 13,500 HP units nearing final completion with another 13,500 HP on deck for restoration. These assets were underutilized in the current state and FIP performed a deep restoration needed for today’s operational requirements. As shown in the picture provided, those upgrades included the addition of a 3rd axle for weight distribution and bridge laws. New hydraulic systems to include installation of hydraulic powered centrifugal pump along with all the other tasks associated with a restoration of this level – powertrain inspections / repairs, power end and fluid end repairs and or replacements, new hosing for all circuits, and new control system.
We have over 54,000 HP in fracturing / pumping units on our properties, which will make good candidates for fleet addition or refurbishments. We also have slots available to restore your existing equipment to fit current job requirements. Please contact us today to discuss what may be on the horizon for 2024. Greg Leos - VP
Stick’s Box
For years, I have studied pumping units from various manufacturers, either on the yards at districts, traveling to and from the jobsite, or at repair facilities. I have always wondered the same thing over and over: Why is the power end a different color, or looks different? Most of the time, it's because the power end has suffered a failure and had to be replaced.
I then look ahead and give the lube tank a glance; normally, what I see is disheartening. Minimum size, sometimes smaller. From this point, I am curious and want to inspect the whole system. How imbalanced is this system? How undersized? What filtration and how much are they running? Where are the vents located, are they even there? How's the cooler circuit laid out? The questions go on and on, most are answered easily from a quick visual. Where does the system start? At the reservoir. And all eyes should be on that piece of hardware anytime there is an issue or failure.
How is the internal design? The sump area? What size is the tank? It’s a simple system, starts at the reservoir, ends at the reservoir. You will be surprised at how easily something that holds fluid can negatively affect the most abused part of the pumping unit instead of helping it. I always size up from what may be recommended from the manufacturer. The tank and internal baffling should be highly scrutinized. Fluid, GPM, venting, sump, all affect the performance of the reservoir. It's not just a box for lube oil. (continued on page 2)
Letter From Len
We made it through another year without too much excitement, and this new year seems to be staying the same. Let us help you lower costs with our rebuilds, new units, and the used ones we have in stock. We have nearly 50,000 HP in inventory, including a couple of rebuilt 120-barrel blenders and other support equipment.
We will do our best to lower your costs through our strategic buying of components and the efficiencies in our shops. Our team is the best, and they want to help you succeed.
No doubt, it will be an interesting election year, and who knows yet what that may bring to all of us. It could be a terrific fall, and 2025 might be the best ever. Let's get ready and run with it. Len Freemyer - President
QUICK HITS
History:
It’s in the Name:
Enco name was dropped due to its unfortunate meaning of "stalled car" in Japanese.
In 1971, TIME reported that Humble would be renamed Exxon U.S., and Standard Oil of New Jersey would become Exxon Inc. The decision reflected the company's recognition that existing brands could have a global presence. The Enco name was dropped due to its unfortunate meaning of "stalled car" in Japanese. In 1999, ExxonMobil emerged as the result of a merger with Mobil Oil. – AOGHS
“Stone Drill” Patent:
Peter Sweeney from New York City secured a U.S. patent for a "Rock Drills" design, incorporating key elements of the modern rotary rig. Described as a construction suitable for deep well boring, Sweeney's innovation, an improvement on Robert Beart's 1844 British patent, featured a roller bit with replaceable cutting wheels. By giving the head a rapid rotary motion, the wheels cut into the ground or rock, producing a clean hole. The rig's "drill-rod" was hollow, connected to a hose for the introduction of steam or water, facilitating the discharge of dirt and dust from the hole's bottom. - AOGHS
Stick’s Box Continued from page 1
I simply look at the power end fluid reservoir like this: First, I want it to trap and hold all the trash and debris the rotating group (power end) generates or brings in through seals, and vents, in an area separate from the oil I am shuttling through the reservoir. Secondly, I want it to allow all the entrapped air to escape from the lube oil and not send it back through the system regardless of fluid temperature or viscosity. And third, I don’t want the tank design to induce windage or vortexing of the fluid regardless of GPM flow and viscosity of the fluid. If a kidney loop is used, extra caution is needed because it will amplify the failure rate of a poorly designed system.
These systems are not exotic; they are simple. Unfortunately, due to poor systems, Power End replacement is viewed as commonplace, just part of it. I believe in longer component life and putting money where it benefits most, not buying components that are prematurely failing because of a simple overlooked storage tank or mediocre lubricating system. Heston Starkey - Ops Manager
Let Us Help With All Your New Or Used Equipment Needs
Over 50,000 HP is available on our properties, including Frac Pumps, Blenders, and other Support Equipment.
Ten (10) Trailer Mounted
•Radiator Assembly
•Cummins QSK 50 Engine
•Twin Disc 8500 Series Transmission and Torque Convertor
•Power End Assembly
•Fluid End Assembly
•Power End Lubrication
•Packing Lubrication
•Ask about our additional available pump configurations
Additional Equipment Includes:
Four (4) double cement pumping units available for purchase “As Is” or we can rebuild.Currently available: chemical Units, Nitrogen Unit, Data Vans, Manifold Trailers, and Iron Trailers.
By collaborating with FIP, we can effectively help reduce your costs and make well-informed decisions that will have a positive impact on your financials.
Let Us Help With All Your New Or Used Equipment Needs
FIP
Electric Solutions - REDEEM GREEN®
Fracturing
Stimulation
Cementing
Specialty Pumping Units
Electronics & Data Acquisition Solutions
Offshore Solutions
Pumps for CTU Support
Rebuild, Refurbishment, Restoration
After Sales Support
Fire Suppression Systems
+1.817.548.5010