New and Used Oilfield, Frac, and Cementing Equipment for sale includes:

  • Cement Pumps
  • Frac Pumps
  • Frac Blenders
  • Hydration Units
  • Nitrogen Pumpers
  • Data Vans
  • AND MORE

Freemyer Industrial Pressure is the End User’s choice for the best prices and the best service in the industry. We are offering the lowest margins in the industry on all current inventory.

Please view our current inventory below, and contact us today for more information.

  • 817-682-0211
  • 817-228-6887

frac pump

Four (4) Trailer Mounted Frac Pumps

  • Assorted Configurations available
new offshore double Cement Pump for sale

Two (2) New Offshore Double Cement Pumps

    • Narrow skid design with narrow footprint
    • Two (2) Diesel CAT Engines, rated for 630 BHP
    • Two (2) Allison automatic transmissions
    • Two (2) compact 600HP SPM triplex pumps
    • Four (4) hydraulically driven centrifugals
    • One (1) ASME 70 cubic feet surge tank
    • Four (4) Stainless Steel Chemical Totes
    • Four (4) air powered Wilden liquid additive pumps
    • Two (2) 10 barrel tanks, 20 barrel total capacity
    • Four (4) compartment chemical tanks
      • 50 gallon
      • 35 gallon
      • 20 gallon
      • 10 gallon
    • FIP Smart Operating/Acquisition Systems
      • Monitoring Capabilities include: Left side discharge pressure, right side discharge pressure, auxiliary pressure, left side flow, right side flow, total down-hole flow, density, and auxiliary density.
      • 15” Touch Screen Color Monitor will allow the operator to have the ability to operate the unit.
    • Item Numbers Offshore-1-1201F and Offshore-1-1202F
Cement Pump for sale

Double Cement Pumps

  • In running condition and job ready
Cement Pump for sale

Single Cement Pumps

  • In running condition and job ready
Cement Pump for sale

Two (2) Single Cement Pumps

  • Engine:
    • One (1) Detroit Series 60
    • 665HP @2300 RPM
    • Tier 3
  • Transmission: One (1) Allison 4700 OFS – lever selector
  • Pump:
    • One (1) OFM 600 Long Triplex
    • 5” plungers
  • Hours (Approximate Average): 1123
  • Centrifugal Pumps:
    • One (1) Mission: 6x5x11 – Recirculation / Boost
    • One (1) Mission: 4x3x13 – Load / Mix water
  • Displacement Tanks:
    • Two (2) 13 bbl
    • Hydraulically driven mixing paddles
  • Mixing system:
    • Serva HEMI style Head
    • 14 bbl CCM/ AVG tank with mix paddle
  • Hydraulic System:
    • Two (2) closed loop systems
    • Three (3) open loop systems
    • Powered by two (2) transmission driven PTO’s
  • Control System:
    • Standard local controls
    • Trican data acquisition system
    • Micromotion Densitometer
  • Item: 2263F
used frac blender for sale

Used BJ Trailer Mounted Frac Blender

  • One Cummins QSX15 Engine and One Cummins M11 Engine
  • 100 BPM
  • Three Augers
  • One Suction Pump
  • One Discharge Pump
  • One Dry Additive System
  • Item Number Blender-1-202-4075F

Used 100 BPM Trailer Mounted Blender

  • Engine: (1) Cat C-18
  • Tub Style: Open
  • Augers: 3 @ 12″
  • Suction Pump: (1) Gorman Rupp 12×12
  • Discharge Pump: (1) Cobra 14×12
  • Liquid Additives: (8) GPT41
  • Dry Additives: (1)
  • Hours (Approximate): 3659
  • Manufacturer: Dragon
  • Controls: Dragon
  • Year: 2011
  • Stock Number 201 – 1-1516F

70 BPM Blender / Quintuplex Frac Combo Unit

  • 70 bpm Blender
  • Quintuplex Fluid Pump
  • Up to 4.25 m³/minute
  • 2000 Series Detroit 1500 HP V16
  • Allison 9800 Series 7-speed Transmission
  • S&S automatic control of sand and additives
  • Side sand auger for B-train unloading
  • Complete with iron rack
  • Single truck design significantly reduces environmental impact
  • Ideally suited for multiple treatments per day
new hydration unit for sale

New Hydration Unit

  • Consisting of a trailer, engine, hydraulic system, open top hydration tank (213.5 bbls total capacity, 170.7 bbls capacity at weir), suction centrifugal pump and discharge centrifugal pump, chemical tanks, four (4) liquid gel pumps, four (4) liquid chemical pumps, and all necessary valves and controls for normal operations.
  • This unit can be controlled in manual or automatic mode from the operator control console.
  • The FIP Smart Op-Acq System Hydration Automation & Control will have the ability to monitor liquid gel pumps, liquid additive pumps. This system is also designed to automatically or manually adjust and maintain preset set points of liquid gel concentration, liquid additive concentration, suction and discharge centrifugal control
    • Touch Screen Color Monitor will allow the operator to have the ability to operate the unit in manual or automatic mode.
      • Display real time operating parameters
        • Liquid Gel Concentration
        • Liquid Chemical Concentration
        • Suction & Discharge Centrifugal Parameters
        • Monitor Hydraulic Pressures and Temperatures
      • Liquid Gel and Additive Pumps can be slaved to the hydration flow source, blender clean rate, or simulated rate.
    • Webasto circulating heater system for engine coolant, batteries, in-line fuel heater, in tank fuel heater, and hydraulic tank.
  • Item Number Hydration-1-604F

Twenty (20) End Dump Units

  • 24 ton capacity

Two (2) Used Chassis Mounted HydraRig Nitrogen Pumpers, 180K

  • Quantity: Two (2)
  • Peterbilt Model 378 Tridem with CAT C15 @ 615 HP
  • Transmission – Eaton Fuller
  • Air starter
  • 3000-Gal LN2 Tank – ASME VIII Div 1
  • Dimensions: 11’-6” x 40’-8” x 8’-6”
  • Stock # LN2-1-6567
used datavan for sale

Used Data Control Center

  • Model: ET29EXP
  • Mounting: Trailer (29” Body Slide Out)
  • Manufacturer: S&S
  • Hours (Approximate): 300
  • One (1) Treater Computer
  • One (1) Engineering Computer
  • Two (2) Large Overhead Monitors
  • Eight (8) Additional Monitors
  • One (1) Satellite Dish
  • One (1) Pump Controller
  • Two (2) Blender Communication Inputs
  • One (1) Hydration Communication Input
  • One (1) CAS Communication Input
  • Five (5) Communication Reels
  • Eight (8) Auxiliary Pressure Inputs
  • Six (6) Auxiliary Rate Inputs
  • Three (3) HVAC Systems
  • Generator – John Deere engine
  • Quantity: one
  • Datavan-300-3010

Four (4) Used Trailer Mounted Sandkings

  • 3,000 Cubic Feet

ROTEC SAMLD T/A Manifold Trailer

  • 6-Station Manifold
  • 11R22.5 Tires
  • Item Number: Manifold – 1 – 6131F
  • Quantity: one (1)

Proppant Silos

  • Volume – 3,200 ft3
    • Compartment 1 – 2,700 ft3
    • Compartment 2 – 500 ft3
  • Capacity – 176 ton
    • Compartment 1 – 149 ton
    • Compartment 2 – 27 ton

Two (2) Used WACKER NEUSON LTN6 Light Tower Generators with 6KW Generators

  • Lombardino 3 Cylinder Diesel Engine
  • Approximately 1630 hours
  • Four Pancake Lights
  • Item numbers Light-1-1620F and Light-1-1971F

Ten (10) New TWS 600S Triplex Pumps

  • Completely Stuffed Pump Assembly
  • Rated Max Brake Horsepower – 600 BHP
  • Maximum Rod Load – 100,000 lbs
  • Stroke Length – 6 inches
  • Gear Ratio – 4.6:1
  • Plunger Size – 4.5 inch
  • Stock # TWS 600S – SO6387
Used Weir SPM Destiny TWS2500 Triplex Pump for sale

New and Used WEIR SPM Destiny TWS2500 Triplex Pumps

  • 10 inch stroke – 2500HP
  • Power End Reconditioned – No Papers
  • TWS2500 Fluid End – 4.5 inch plungers
  • 15000 PSI Drive Assembly
  • Quantity – Twelve (12) new, One (13) used
  • Item Number: Triplex – 1 – 8498F

New or Rebuilt Allison S9820 Transmissions

    • Straight-Thru Model
      • Gross Input Torque: 8542 (6300) N•m (lb-ft)
      • Gross Input Power: 1752 (2350) kW (hp)
      • Turbine Torque Net 10235 (7550) N•m (lb-ft)
    • Oil Field Pumping
    • Engine Interface
      • Acceptable Full-Load Engine Governed Speed: 1800 – 2100 rpm
      • Minimum Engine Idle Speed Range (with Transmission in Drive): 550 rpm
    • Mechanical Ratios (Gear Ratios Do Not Include Torque Converter Multiplication)
      • First 3.75 : 1
      • Second 2.69 : 1
      • Third 2.20 : 1
      • Fourth 1.77 : 1
      • Fifth 1.58 : 1
      • Sixth 1.27 : 1
      • Seventh 1.00 : 1
      • Eighth 0.72 : 1
    • Stock#: Allison SO6328