Click on for more info.
EQUIPMENT DESCRIPTION - The Data Van is customized to Fit Your Requirements
This equipment shall comprise of an enclosed trailer designed and developed to be operated in off-road environment of oil fields. The unit shall be entirely independent and designed/intended for joint operation with set of fracturing equipment.
TRAILER - Customized to Fit Your Requirements
45.5’ overall length, 34.5’ long main deck, 11’ long gooseneck, 8’-6” overall width, and +/-96” Interior Height, 45” Maximum Floor Ht.
Interior Layout – Interior layout to consist of three (3) areas separated by a partition wall with an integral sliding door, rear area will be a pump control room, center area will be data control and customer seating, and front gooseneck riser to be lab area.
Pump Control Finishing – Bench seat along roadside wall, full length counter section along front wall. Includes ‘L’ section along roadside wall, bottom cabinets, electrical cabinets, overhead cabinets, and bank of drawers.
Lab Area Finishing – Bench seat along roadside wall, full length counter section along front wall. Includes ‘L’ Section along roadside wall, bottom cabinets, electrical cabinets, overhead cabinets, bank of drawers, kitchenette to include fridge, microwave, and coffee pot.
Generator – 30KW Diesel Generator. May vary according to power requirements.
Central Heat and Air Conditioning in all three (3) areas
COMPARTMENT OF THE EXTERNAL CONNECTIONS
The lockable compartment cable connector panel shall be connected to the corresponding electronic equipment installed in a compartment. Panel is capable of connecting up to 20 pumping units.
CABLES AND SPOOLS
Twelve (12) universal metal cable spools with stopper and brake will be securely fastened inside the side compartment. Each of the spools is 150 feet of cable for connection of the various terminal devices and output devices for data gathering system.
FRACTURING OPERATIONS CONTROL CENTER
This console will have the ability to monitor and control up to (20) frac pumps with control panels provided as follows:
- Engine emergency kill/shutdown control
- Touch screen monitor:
- Displays all real time frac operation parameters to include some engine, transmission, and quintuplex
- Touch screen transmission gear selector
- Touch screen engine stop button
- Touch screen drive line brake enlarge/disengage
- Encoder Throttle Controller
- Instant neutral switch
- Inlet cable connection
Three (3) separate touch screen monitors will be installed to view parameters and stage set up for Blender, Hydration Unit, and Master Frac Controller in the pump room
FIP MASTER FRACQ DATA ACQUISITION SYSTEM
Data acquisition system will include components required for all the operational information recording.
COMPUTER AND CORRESPONDING HARDWARE
Two (2) Super Servers will be installed with four (4) desktop monitors. Both computers will be used for data acquisition and will be used to display information in real time and plotting the graphs as per the data entered for the other auxiliary functions. Computer system will have network connection device to allow for multiple monitors and to display the information from the computers no less than four (4) LCD screens must be mounted with reliable, vibration-proof fasteners on the wall of the box van.
EQUIPMENT FOR PRINTING OF HARD COPIES
One (1) color laser printer, one (1) combo fax, copier, and printer
Software in a package with PC-Windows, Professional Edition; Microsoft Office, Professional Edition.
SOFTWARE FOR ACQUISITION OF REAL TIME DATA
The computer registers the following signals – Information on pressure, flow rate information, and information on density. Displayed on the color monitor are the following – Treatment pressure, proppant concentration, volume, other parameter can be monitored, customer needs to specify.